top
.458 SOCOM RRA LAR-458 CAR A4 Rifle
10 1/2 Inch A2 Pistol Upper Half, .223/5.56
With R-4 Handguard and A2 Front Sight. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
10 1/2 Inch A2 Pistol Upper Half, 9mm
With R-4 Handguard and A2 Front Sight. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
10 1/2 Inch A4 Pistol Upper Half, .223/5.56
With R-4 Handguard and Gas Block Sight Base. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
10 1/2 Inch A4 Pistol Upper Half, 9mm
With R-4 Handguard and Gas Block Sight Base. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
104 - Safety selector lever, Ambi
104 - Safety selector lever, standard
104 - Safety selector lever, Star
104 - Safety selector lever, Star, Ambi
106 - Hammer with J pin, standard
107 - Buffer assembly, CAR heavy
107 - Buffer assembly, standard
113A - Receiver extension, CAR
113B - Receiver extension, standard
113T - Receiver extension, entry length
16 Inch Varmint A4
Please allow four to eight weeks for delivery.
16 Inch Varmint A4 Upper Half
Please allow four to eight weeks for delivery.
16 Inch Varmint EOP
Please allow four to eight weeks for delivery.
16 Inch Varmint EOP Upper Half
Please allow four to eight weeks for delivery.
18 - Handguard liner, each (2 required)
18 Inch Varmint A4
Please allow four to eight weeks for delivery.
18 Inch Varmint A4 Upper Half
Please allow four to eight weeks for delivery.
18 Inch Varmint EOP
Please allow four to eight weeks for delivery.
18 Inch Varmint EOP Upper Half
Please allow four to eight weeks for delivery.
1911 8 round .45 ACP mag, Elite, stainless
1911 9 round 9mm mag, stainless
20 - Front sight dowel pin, each (2 required)
20 - Front sight taper pin, each (2 required)
20 Inch Predator Pursuit Upper Half
Please allow four to eight weeks for delivery.
20 Inch Varmint A4
Please allow four to eight weeks for delivery.
20 Inch Varmint A4 Upper Half
Please allow four to eight weeks for delivery.
20 Inch Varmint EOP
Please allow four to eight weeks for delivery.
20 Inch Varmint EOP Upper Half
Please allow four to eight weeks for delivery.
23 - Charging handle latch roll pin
24 Inch Varmint A4
Please allow four to eight weeks for delivery.
24 Inch Varmint A4 Upper Half
Please allow four to eight weeks for delivery.
24 Inch Varmint EOP
Please allow four to eight weeks for delivery.
24 Inch Varmint EOP Upper Half
Please allow four to eight weeks for delivery.
25 - Charging handle latch spring
28 - Bolt carrier key screw, each (2 required)
33 - Bolt gas ring, improved, new design, each (3 required)
Patented design assures ring gaps will not align.
4 - Front sight housing, with bayonet lug
4 - Front sight housing, without bayonet lug
49 - Ejection port cover spring
53 - Rear sight elevation spring pin
54 - Forward assist spring pin
55 - Rear sight elevation spring
56 - Rear sight elevation knob
56NM - Rear sight elevation index knob, NM, one piece
57 - Rear sight elevation index
6 inch recoil plug, for long slide with standard spring
6.8 SPC Mid-Length A2 Upper Half
6.8 SPC Mid-Length A4 Upper Half
6.8 SPC RRA LAR-6.8 Mid-Length A2
6.8 SPC RRA LAR-6.8 Mid-Length A4
62 - Lockable knob locking screw
62 - Rear sight windage knob, lockable
63 - Rear sight windage knob pin
69 - Rear sight helical spring
7 Inch A2 Pistol Upper Half, .223/5.56
With Aluminum Free Float Tube and A2 Front Sight. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
7 Inch A2 Pistol Upper Half, 9mm
With Aluminum Free Float Tube and A2 Front Sight. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
7 Inch A4 Pistol Upper Half, .223/5.56
With Aluminum Free Float Tube and Gas Block Sight Base. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
7 Inch A4 Pistol Upper Half, 9mm
With Aluminum Free Float Tube and Gas Block Sight Base. For pistol and SBR applications only, all NFA rules apply. Please allow four to eight weeks for delivery.
71 - Rear sight windage screw, NM
77 - Trap Door Assembly, plastic
87 - Hammer and trigger pin (2 required)
87 - Hammer and trigger pin, NM (2 required)
90 - Trigger guard pivot roll pin
9mm 25 Round UZI Mag
Modified for conversion use.
9mm 32 Round UZI Mag, Like New, not modified for AR use
Not modified for AR use.
9mm 32 Round UZI Magazine, Like New, not modified for AR use
Not modified for AR use.
9mm A1 Style Flash Hider
1/2-36 thread.
9mm Bolt Catch
Only for use in RRA LAR-9 Lower Receiver Assembly WITH integral magwell.
9mm CAR A2
Please allow four to eight weeks for delivery.
9mm CAR A2 Upper Half
Please allow four to eight weeks for delivery.
9mm CAR A4
Please allow four to eight weeks for delivery.
9mm CAR A4 Upper Half
Please allow four to eight weeks for delivery.
9mm Case Deflector with Spring, Black
9mm Case Deflector with Spring, Green
9mm Chrome Moly Barrel Assembly, 16-Inch CAR
With bayonet lug, threaded, 1/2-36 thread.
9mm Chrome Moly Barrel Assembly, 16-Inch Mid-Length
With bayonet lug, threaded, 1/2-36 thread.
9mm Forged A2 Upper Receiver Assembly
Complete with rear sight, port door and case deflector.
9mm Forged A4 Upper Receiver Assembly
Complete with port door and case deflector.
9mm LULA Mag Loader
For Colt SMG style mags.
9mm Magwell Conversion Block
For lower receivers WITHOUT integral magwell.
9mm Mid-Length A2
Please allow four to eight weeks for delivery.
9mm Mid-Length A2 Upper Half
Please allow four to eight weeks for delivery.
9mm Mid-Length A4
Please allow four to eight weeks for delivery.
9mm Mid-Length A4 Upper Half
Please allow four to eight weeks for delivery.
9mm RRA LAR-9 10 Round Magazine
9mm RRA LAR-9 Complete Lower Half
9mm marked, complete with all conversions parts. Please allow six to eight months for delivery.
9mm RRA LAR-9 Forged Lower Receiver Assembly
9mm marked. Please allow six to eight months for delivery.
9mm RRA LAR-9 Pistol Lower Receiver Assembly
Includes 9mm marked lower receiver with integral magwell, feed ramp, 9mm ejector, 9mm bolt catch, mag catch, spring and button. Marked Pistol Only. Please allow six to eight months for delivery.
9mm Smith Vortex Flash Hider
1/2-36 thread.
9mm UZI 25 Round Magazine
Modified for AR conversion use.
A.R.M.S. #40 Flip-up Rear Sight
Spring loaded, with quick release lever. 250-300 meter and 500-600 meter flip apertures.
A.R.M.S. #40L Low Profile Flip-up Rear Sight
Same features as #40, but with lower profile, allowing more clearance for mounting optics.
A1 Flash Hider, .223
1/2-28 thread.
A1 Flash Hider, 9mm
1/2-36 thread.
A2 Flash Hider, .223
1/2-28 thread.
A2 Front Sight Tool, four prong
A2 Handle Mount Brass Deflector
A2 Removable Carry Handle Mount Brass Deflector
A2 Stock Receiver End Plate
With single sling loop on left side for right hand shooters.
A4 Flattop Brass Deflector, for use with EOTech
A4 Flattop Mount Brass Deflector
Accu-Wedge Buffer, eliminates play between upper and lower receiver
ACE Skeleton Stock, ARFX Full Size
ACE Skeleton Stock, ARFX-E Shorty
Fits over 113T - Receiver Extension Tube, Entry Length, item # AR0113T
Aimpoint 3XMag Magnifying Module
Aimpoint Comp M2 Sight
Night vision compatible, with 4 MOA Red Dot Reticle, 10 position switch, Graphite Gray finish.
Aimpoint Comp ML2 Sight
With 4 MOA Red Dot Reticle, 10 position switch, Graphite Gray finish.
Aimpoint QRP Mount
For use with Picatinny bases.
Aimpoint Spacer
Required to co-witness with QRP.
Ambi-Catch, ambidextrous magazine release, drop-in design
Badger Tactical Charging Handle Latch
Badger Tactical Charging Handle Latch
Basic Limited Match, .45 ACP with Duotone Black/Green
Beta C-Mag Drum Mag / 10 Round Speed Loader / Black Pouch
Beta C-Mag Drum Mag / 10 Round Speed Loader / Desert Sand Pouch
Beta C-Mag Drum Mag / 10 Round Speed Loader / Green Pouch
Beta C-Mag Drum Mag / 10 Round Speed Loader / Woodland Camo Pouch
Beta C-Mag Drum Mag / 5 Round Loader / Black Pouch
Beta C-Mag Drum Mag / 5 Round Loader / Desert Sand Pouch
Beta C-Mag Drum Mag / 5 Round Loader / Green Pouch
Beta C-Mag Drum Mag / 5 Round Loader / Woodland Camo Pouch
Blue Force Gear UDC Sling, with HK Style Hook Adapter
Blue Force Gear UDC Sling, with Quick Detach Adapter
Bullseye Wadcutter Lower Half Only
For .22LR conversions.
Bullseye Wadcutter with Frame Mount, .45 ACP
Bullseye Wadcutter with RRA Bullseye Rib, .45 ACP
Bullseye Wadcutter with RRA Slide Mount, .45 ACP
Bullseye Wadcutter with RRA Slide Mount, 9mm
CAA Tactical Buttstock Kit, Black
CAA Tactical Buttstock Kit, Green
Cammenga EasyMag 30 Round, .223 Caliber
CAR A2
Please allow four to eight weeks for delivery, six to eight weeks with chrome lined barrel.
CAR A2 Upper Half
Please allow four to eight weeks for delivery, six to eight weeks with chrome lined barrel.
CAR A2 with 6-Position Tactical Stock
Please allow four to eight weeks for delivery, six to eight weeks with chrome lined barrel.
CAR A4
Please allow four to eight weeks for delivery, six to eight weeks with chrome lined barrel.
CAR A4 Complete Rifle Kit
All parts less stripped lower receiver. Please allow four to six weeks for delivery.
CAR A4 Complete Rifle Kit, with Chrome Lined Barrel
All parts less stripped lower receiver. Please allow four to eight weeks for delivery.
CAR A4 Upper Half
Please allow four to eight weeks for delivery, six to eight weeks with chrome lined barrel.
CAR A4 with 6-Position Tactical Stock
Please allow four to eight weeks for delivery, six to eight weeks with chrome lined barrel.
CAR Stock End Plate Adapter, Loop
Installs without removing receiver extension.
CAR Stock End Plate Adapter, Slotted
Installs without removing receiver extension.
CAR Stock Receiver End Plate
With dual sling loops.
Carry Handle Assembly, with A2 Rear Sight
CHROME LINED Chrome Moly Barrel Assembly, 16 Inch CAR
With chrome lined bore and chamber. With bayonet lug, threaded, 1/2-28 thread.
CHROME LINED Chrome Moly Barrel Assembly, 16 Inch Mid-Length
With chrome lined bore and chamber. With bayonet lug, threaded, 1/2-28 thread.
CHROME LINED Chrome Moly Barrel Assembly, 20 Inch
With chrome lined bore and chamber. With bayonet lug, threaded, 1/2-28 thread.
CHROME LINED Chrome Moly Lightweight R-4 Barrel Assembly, 16 Inch CAR, 1:7 Twist
With chrome lined bore and chamber. With bayonet lug, threaded, 1/2-28 thread.
CHROME LINED Chrome Moly Lightweight R-4 Barrel Assembly, 16 Inch CAR, 1:9 Twist
With chrome lined bore and chamber. With bayonet lug, threaded, 1/2-28 thread.
CHROME LINED Chrome Moly R-4 Barrel Assembly, 16 Inch CAR
With chrome lined bore and chamber. With bayonet lug, threaded, 1/2-28 thread.
Chrome Moly Barrel Assembly, 16 Inch CAR
With bayonet lug, threaded, 1/2-28 thread.
Chrome Moly Barrel Assembly, 16 Inch Mid-Length
With bayonet lug, threaded, 1/2-28 thread.
Chrome Moly Barrel Assembly, 20 Inch
With bayonet lug, threaded, 1/2-28 thread.
Chrome Moly R-4 Barrel Assembly, 16 Inch CAR
With bayonet lug, threaded, 1/2-28 thread.
CMP Black Nylon Sling
Adjustable black nylon sling.
Cocobolo grips, mag well and ambi
Complete Lower Half / NM Two Stage Trigger / 6-Position Tactical CAR Stock
Please allow six to eight months for delivery.
Complete Lower Half / NM Two Stage Trigger / A2 Buttstock
Please allow six to eight months for delivery.
Complete Lower Half / Standard Trigger / 6-Position Tactical CAR Stock
Please allow six to eight months for delivery.
Complete Lower Half / Standard Trigger / A2 Buttstock
Please allow six to eight months for delivery.
Coyote Carbine - 16 Inch Barrel
Please allow four to eight weeks for delivery.
Coyote Rifle - 20 Inch Barrel
Please allow four to eight weeks for delivery.
Daniel Defense LITE Quad Rail 12.0, Rifle Length
Aluminum free float quad rail handguard, for RRA LAR-8 .308 caliber.
Daniel Defense LITE Quad Rail 9.0, Mid-Length
Aluminum free float quad rail handguard, for RRA LAR-8 .308 caliber.
Daniel Defense Quad Rail 12.0, Rifle Length
Aluminum free float handguard, designed to fit behind the front sight or gas block.
Daniel Defense Quad Rail 12.0FSP, CAR Length
Aluminum free float handguard, designed to work with CAR front sight.
Daniel Defense Quad Rail 12.0FSPM, Mid-Length
Aluminum free float handguard, designed to work with mid-length front sight.
Daniel Defense Quad Rail 7.0, CAR Length
Aluminum free float handguard, designed to fit behind the front sight or gas block.
Daniel Defense Quad Rail 9.0, Mid-Length
Aluminum free float handguard, designed to fit behind the front sight or gas block.
Daniel Defense Quad Rail 9.5FSP, CAR Length
Aluminum free float handguard, designed to work with CAR front sight.
Dewey Breech Rod Guide, .223 Caliber
Dewey Breech Rod Guide, .308 Caliber
Dewey Breech Rod Guide, 6.8 SPC Caliber
Eagle Discreet CAR Case, 35 in x 13 in x 2.5 in
Eagle Discreet Rifle Case, 42 in x 13 in x 2.5 in
Eagle RC-4108 Assault Rifle Case, 41 in x 11.5 in x 2.5 in
Eagle SMG Mag Pouch, SAS-MP-5
Carries 3 mags, with 2 inch wide leg straps for drop style, or may be worn on a belt.
Eagle Tactical Assault Sling TAS-1
For A2 Buttstock.
Eagle Tactical Assault Sling TAS-3
For CAR Stock.
Ed Brown tactical ambi safety, blue
Ed Brown tactical ambi safety, stainless
Ed Brown tactical safety, blue
Ed Brown tactical safety, stainless
Ed Brown wide ambi safety, blue
Ed Brown wide ambi safety, stainless
Ed Brown wide safety, stainless
Elite CAR A4 / Chrome Lined Barrel / with A2 Carry Handle Assembly